Test Preparation on Civil Reinforced Cement Concrete (RCC) Part-1
1.
An R.C.C. beam of 6 m span is 30 cm wide and has a lever arm of 55 cm. If it carries a U.D.L. of 12 tper m and allowable shear stress is 5 kg/cm2, the beam
2.
According to I.S. : 456, slabs which span in two directions with corners held down, are assumed tobe divided in each direction into middle strips and edge strips such that the width of the middlestrip, is
3.
The load stress of a section can be reduced by
4.
The diameter of the column head support a flat slab, is generally kept
5.
If is the uniformly distributed load on a circular slab of radius fixed at its ends, themaximum positive radial moment at its centre, is
6.
The maximum ratio of span to depth of a slab simply supported and spanning in one direction, is
7.
If the width of the foundation for two equal columns is restricted, the shape of the footinggenerally adopted, is
8.
The floor slab of a building is supported on reinforced cement floor beams. The ratio of the endand intermediate spans is kept
9.
Pick up the correct statement from the following:
10.
In case the factor of safety against sliding is less than 1.5, a portion of slab is constructeddownwards at the end of the heel slab, which is known as
